Mute Function; Handset Volume Setting; Speaker Volume Setting; Tone Control Setting - Geemarc CL330 Notice D'utilisation

USING THE TELEPHONE

Mute Function

If you wish, you can speak privately to someone else in the room
without your caller overhearing. You will still be able to hear the
caller but they cannot hear you during the mute operation.
To switch on the mute mode during a call just press and hold
button. Your caller will not be able to hear you anymore. Release
to resume the conversation with your caller.

Handset Volume Setting

During a call, the handset volume can be adjusted using the control
.
knob on the front Then it can be increased using the
button
Note: Setting the receiver volume to maximum may under certain
circumstances, cause ear damage. Therefore, it is recommend that
you adjust the volume .

Speaker Volume Setting

During a call in handsfree mode, you can adjust the speaker volume
to a desirable level. Simply use the slide control located on the left
side of the CL330 unit

Tone Control Setting

During a call, in handsfree mode, you can adjust the tone to a
desirable level. Simply use the slide control located on the front of
the CL330 unit
Note: Tone adjustment is not possible when the receiver volume is
set to its minimum level, and if the amplify button (5) is not ON ( Led
lit)
20