13- Mute Button; 14- Storing Telephone Numbers - Geemarc AmpliPOWER 40 Mode D'emploi

Using the phone
These are used with the new services provided on digital
exchanges. For details please contact your network operator.
13 – Mute button
If you wish to speak privately to someone else in the room
without your caller overhearing, press and hold the
button. You will still be able to hear the callers but they cannot
hear you during the mute operation. To resume normal
conversation, release the
14 – Storing telephone numbers
Your telephone can store12 direct memories including 3 priority
numbers (21 digits maximum for each memory).
For example, the 3 priority P1, P2, P3 memories allow you to
store the 3 numbers below:
= Fire
P1
To store a number please follow instructions below:
- Lift the handset.
- Press
- Press M1, M2, ..., or M9 or one of 3 priorities numbers to store
your number.
- Dial the number.
- Press
Numbers will be lost after a few hours if you disconnect your
phone. Entering a new number in memory
will automatically
number.
15 – Dialing stored numbers
- Lift the handset and await the dial tone.
- Press appropriate button M1, M2, ..., or M9
or one of 3 priority memories, the stored
number will be dialled automatically.
= Police
P2
button.
button again.
erase the
button.
previous
11
= Doctor
P3