Using The Phone; 1- Answer A Call; 2- Making A Call; 3- Last Number Redial - Geemarc AmpliCL100 Mode D'emploi

Using the phone

If you are using this telephone with a
hearing aid, set your hearing aid to
1 – Answer a call
- When an incoming call is received the phone will ring and
flash, to answer the call lift the handset and speak.
- On completion of the call, carefully replace the handset in
the cradle to release the line.
2 – Making a call
- Lift the handset.
- Await the dial tone and dial required number.
- On completion of the call,carefully replace the handset in
the cradle.
3 – Last number redial
- Lift the handset.
- Await the dial tone and press
-The previously dialled number will be automaticaly redialled
(not in use for memory numbers).
4 – Recall (
These are used with the new services provided on digital
exchanges. For details please contact your network operator.
5 – Mute button
If you wish to speak privately to someone else in the room
without your caller overhearing, press the
will still be able to hear the callers but they cannot hear you
during the mute operation. Press
resume normal conversation.
the "T" setting.
), * & # buttons
11
Using the phone Using the phone Using the phone
button.
button again to
button. You