ESAB Origo Mig 410 Manuel D'instructions page 11

GB
Check that the unit is connected to the correct mains power supply voltage, and that it is protected by
the correct fuse size. A protective earth connection must be made, in accordance with regulations.
Recommended fuse sizes and minimum cable areas
TM
Origo Mig 410
Voltage V
Current A
at100% duty cycle
at 60% duty cycle
at 50% duty cycle
Cable area mm
2 2 2 2
Fuse, slow A
TM
Origo Mig 510
Voltage V
Current A
at100% duty cycle
at 60% duty cycle
Cable area mm 2 2 2 2
Fuse, slow A
NB: The mains cable areas and fuse sizes as shown above are in accordance with Swedish
regulations. They may not be applicable in other countries: make sure that the cable area and fuse
sizes comply with the relevant national regulations.
mi410,510e
Rating plate with supply connection data
3∼ 50 Hz 3∼ 50/60 Hz
230 400/415
28 16
42 24
45 28
4 x 6 4 x 2,5
25 20
3∼ 50 Hz 3∼ 50/60 Hz
230 400/415
43 25
68 39
4 x 16 4 x 6
63 35
- - 11 - -
3∼ 50 Hz 3∼ 60 Hz
500 230
13 28
19 41
20 45
4 x 2,5 4 x 6
20 25
3∼ 50 Hz 3∼ 60 Hz
500 230
20 43
31 68
4 x 6 4 x 16
35 63
3∼ 60 Hz
440/460
14
21
22
4 x 2,5
20
3∼ 60 Hz
440/460
23
35
4 x 6
25