Example Set Up - Yamaha MS101II Mode D'emploi

Example Set up

Make sure all your equipment is powered off, then connect the MS101 II s power cable to a suitable AC receptacle. Connect your
other equipment, synthesizer, CD player, etc., to the MS101 II , then power on. There are many different ways in which the MS101 II s
can be integrated into an audio system, two examples are shown below.
Microphones are connected to the MIC INPUTs, a keyboard is connected to the LINE 2 input, and a CD player is connected to the
LINE 1 input allowing you to sing and play along with your favorite songs or even your own songs.
Microphone
Synthesizer
In this example, the monitor outputs of a Yamaha MD recorder Multitrack are connected to the LINE 2 inputs on a pair of MS101 II s
for multitrack monitoring.
(Connect to the rear panel LINE INPUTs.)
MS1012
Microphone
Stereo System
(Tape player, CD player, etc.)
Multi-track MD recorder
3
MS1012
Cassette recorder