Wire Cup Brush Assembly; Wire Wheel Assembly - Bosch GWX18V-13C Consignes D'utilisation/De Sécurité

Wire Cup Brush Assembly

tool operations. Do not discard guard
when not in use. Always reinstall wheel
guard when converting back to grinding
operations. When using Wire Cup Wheels,
tool may be used without a guard.
brush accessories. Handling of wire brush
accessories without gloves may result in
personal injury.
To install wire cup brush (Fig. 14)
Follow instructions for Mounting and Re-
moving X-Lock Accessories starting on
page 17.

Wire Wheel Assembly

To install wire wheel (Fig. 15)
1. Inspect and adjust Type 27 Grinding
Guard to the proper position, as shown
in figure 6 on page 16.
2. Follow instructions for "Mounting ac-
cessory to the tool" and "Removing the
accessories on page 18.
page heading
A type 27 wheel guard
may not be used for all
Wear protective gloves
when handling
Assembly
Fig. 14
wire
Wire Cup
Brush
-21-
Hand
Shield
Fig. 15
Type 27
Wheel Guard
Wire Wheel