Dell PowerVault 220S Guide D'installation page 12

Push the rail forward until the mounting hooks are positioned in their square holes on
3
the vertical rail, and then push down on the mounting-bracket flange until the
mounting hooks seat in the square holes, and the blue push button pops out and
clicks.
F i g u r e 1 - 5 .
blue push button
front vertical rail
At the back of the cabinet, pull back on the mounting-bracket flange until the
4
mounting hooks are positioned in their square holes on the vertical rail, and then push
down on the mounting-bracket flange until the mounting hooks seat in the square
holes, and the blue push button pops out and clicks.
Repeat steps 1 through 4 for the remaining rail on the other side of the rack.
5
Ensure that the rails are mounted at the same position on the vertical rails on each
6
side of the rack.
1-8 Ra c k I n st allat io n G u ide
I n s t a l l i n g t h e R a p i d R a i l s M o u n t i n g R a i l s
front of rack
mounting hooks (2)
mounting bracket flange
RapidRails mounting rail (2)