Venga VG RVC 3000 Mode D'emploi page 8

E. Start cleaning cycle
Press the power button
up the robot.
press the power button
cleaning cycle (or press the auto button
on remote control).
If its battery gets low before finishing a
cleaning cycle, the robot will return
automatically to the charging dock.
lf the charging dock is inaccessible, the
robot will return to its starting location and
the cycle will end.
In this case, please place the robot
manually on its dock.
F. Pause
To pause the robot press the
press the button on remote control.
To resume the cleaning cycle, press
button again.
To send robot back to the charging dock,
press button.
G. Power off
To end the cleaning cycle and put your
robot in standby mode, press and hold
button until robot indicators turn off.
VG RVC 3000
once to wake
again to start a
button or
8