Venga VG RVC 3000 Mode D'emploi page 11

CLEANING SCHEDULE
Your venga robot has cleaning schedule settings which allow you to customize when robot
cleans your home. These settings are available only through the remote control.
Note: Please make sure the remote control is located near by the robot while setting the
clock or schedule as it has to communicate with the robot.
1. Set the remote control's clock
Press button on remote
control, and then the hour
section begins to flash in
the clock display setting
window.
2. Setting Cleaning Schedule
Press button
remote control, and then
the hour section begins to
flash in the clock display
setting window.
3. Cancel the Cleaning Schedule
Press and hold
"BEEP" when the cleaning schedule process has been canceled completly.
Press or
the desired figures. Press
the or
the minute or hour section
Press or
on
the desired figures. Press
the or
the minute or hour section
button approximately 4 seconds on remote control, the robot will
button to select
button to select
button to select
button to select
11
And then press the
button. the robot will "BEEP"
when the clock setting
completed.
And then press the
button. the robot will "BEEP"
when the clock setting
completed.
VG RVC 3000