Venga VG RVC 3000 Mode D'emploi page 7

2. Place the charging dock again the
wall. Make sure the place is open and
uncluttered area leaving at least :
• 2 meters（6.5 feets）in front of
the charging dock
• 1 meter (2.3 feets) on both sides
of the charging dock.
3. Connect the round connector of the
adapter into the power socket on the
charging dock and the other end into
a wall outlet.
Install the charging dock in a location that
your venga robot can easily access. it is
recommended to place the charging
dock against a wall, and on a hard-level
surface rather than on rugs or carpets.
always keep the charging dock plugged
in, otherwise the robot will not
automatically return to it.
B. Install side brushes
Attach side brushes to the bottom of robot
by pressing a brush into each slot.
C. Turn on the main power switch on the
bottom of robot
D. Activate the robot
Place robot onto the charging dock,
making sure the metal charging contacts
on the charging dock match up with
those underneath the robot. if successful
you will hear a series of tones. once the
power button illuminates, the venga
robot is ready for use.
7 VG RVC 3000