Publicité
Les langues disponibles
Les langues disponibles
EN
Operating instructions
generated by various operations. The dust mask or respirator must be capable of
filtering particles generated by your operation. Prolonged exposure to high intensity
noise may cause hearing loss.
n)
Keep bystanders a safe distance away from work area. Anyone entering the work
area must wear personal protective equipment.
a broken accessory may fly away and cause injury beyond immediate area of
operation.
o)
Hold power tool by insulated gripping surfaces only, when performing an operation
where the Bristle Blaster
contacting a "live" wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
p)
Never lay the power tool down until the accessory has come to a complete stop.
spinning accessory may grab the surface and pull the power tool out of your control.
q)
Do not run the power tool while carrying it at your side.
spinning Bristle Blaste
body.
r)
Ensure the air vents filter cap is in place, (Figure 2). The air vent filter cap can be
removed for cleaning by simply pulling it away from the toolbody.
s)
Regularly clean the power tool's air vents (Figure 2).
dust inside the housing and excessive accumulation of powdered metal may cause
electrical hazards. The air vent cap may be removed for cleaning, use non-metallic
objects only.
t)
Do not operate the power tool near flammable materials.
materials.
u)
Do not use any liquid coolants.
electrocution or shock.
4.2
Kickback and Related Warnings
Kickback is a sudden reaction to a rotating wheel which can cause rapid stalling of
the rotating Bristle Blaster
be forced in the direction opposite of the Bristle Blaster
a)
Maintain a firm grip on the power tool and position your body and arm to allow you
to resist kickback forces. Always use auxiliary handle, if provided, for maximum
control over kickback or torque reaction during start-up.
torque reactions or kickback forces, if proper precautions are taken.
b)
Never place your hand near the rotating Bristle Blaster
kickback over your hand.
c)
Do not position your body in the area where power tool will move if kickback occurs.
Kickback will propel the tool in direction opposite to the Bristle Blaster
movement at the point of snagging.
d)
Use special care when working corners, sharp edges etc. Avoid bouncing and
snagging the Bristle Blaster
to snag the rotating Bristle Blaster
damage of the Bristle Blaster
e)
Do not attach any other belt or Adaptor System than the ones provided by the
manufacturer.
6
®
Belt may contact hidden wiring.
®
Belt could snag your clothing, pulling the accessory into your
Using water or other liquid coolants may result in
®
Belt which in turn causes the uncontrolled power tool to
®
Belt.
Corners, sharp edges or bouncing have a tendency
®
Belt and cause loss of control or kickback,
®
Belt and even brake of the tooth belt.
BRISTLE BLASTER
Fragments of workpiece or of
The Bristle Blaster
Accidental contact with the
The motor's fan will draw the
Sparks could ignite these
®
Belt's rotation.
The operator can control
®
Belt.
Accessory may
®
CORDLESS
®
Belt
The
®
Belt's
Publicité
