Montipower BRISTLE BLASTER CORDLESS Mode D'emploi page 14

EN Operating instructions
13. Technical Specifications
Emission values
These values make it possible to assess the emissions from the power tool and to compare
different power tools. Depending on the operating conditions, the condition of the power tool
or the accessories, the actual load may be higher or lower. For assessment purposes, please
allow for breaks and periods when the load is lower. Based on the adjusted estimates, arrange
protective measures for the user e.g. organisational measures.
Vibration total value (vector sum of three directions) determined in accordance with EN 60745:
a = Vibration emission value (polishing)
h, P
Typical A-effective perceived sound levels:
L = Acoustic power level K
WA
During operation the noise level can exceed 80 dB(A).
Wear ear protectors!
Problems, faults:
In individual cases, the speed may fluctuate temporarily if the machine is exposed to
extreme external electromagnetic disturbances or the electronic restart protection
may respond. In this case, switch the machine off and on again.
14
K
h,P
L
pA
, K = Uncertainty
pA WA
BRISTLE BLASTER
= Uncertainty (vibration)
= Sound pressure level
®
CORDLESS