Montipower BRISTLE BLASTER CORDLESS Mode D'emploi page 10

EN Operating instructions
6. Fitting the Adaptor System
Disconnect the battery from the unit before changing the belt or Adaptor System.
The machine must be switched off and the spindle at a standstill.
6.1 Positioning the accessory
See illustration below (Figure 7).
a. Fasten Bristle Blaster
Adaptor System (pay attention to rotating direction) and the related serrated lock
washer and screw.
10
®
Belt correctly to the tool using the related MontiPower
Figure 7
®
BRISTLE BLASTER CORDLESS
®