Montipower BRISTLE BLASTER CORDLESS Mode D'emploi page 4

EN Operating instructions
Dear customer!
®
MontiPower thanks you for the purchase of one of its products and invites you to read these
operating instructions, which contains all the necessary information for the correct use of
the tool. It is therefore recommended to read the instructions completely and to follow the
information therein. Please keep the manual in good condition. The contents of this manual
may be changed without notice and without the implication of any additional obligations.
Therefore any changes / improvements can be read as additions to this version. It is forbidden
to copy or translate any part of this manual without the prior written approval of the
manufacturer.
Technical Data: Bristle Blaster
Specifications
Weight
Belt diameter (outer)
Output
Torque
Idle speed (±5%)
Vibration
Required battery, voltage
Sound pressure level
*2) 2006/42/EG, 2014/35/EU, 2014/30/EU
*3) DIN EN 60745-2-3 (VDE 0740-2-3)
Original instructions
1. Declaration of Conformity
We declare under our sole responsibility: These Bristle Blasters
number *1), comply with all relevant requirements of the directives *2) and standards *3).
2. Specified Use
The machines, with original MontiPower
simultaneously creating cleanliness and anchor profile. The machine can be equipped with
the standard 23mm wide belt as well as the 11mm wide belt. Special care in regards to brush
pressure has to be taken when using the 11mm belt.
The user bears sole responsibility for any damage caused by improper use. Generally accepted
accident prevention regulations and the enclosed safety information must be observed.
4
®
Cordless (*1) Serial number)
Value Unit
2,2 kg I 4,9 lbs
110 mm
700 W
0.7 Nm
2,300 rpm
4 m/sec
CAS (Cordless Alliance System), LiHD 18 V
< 80 dB(A)
®
accessories, are suitable for surface preparation
BRISTLE BLASTER
2
®
, identified by type and serial
®
CORDLESS