Montipower BRISTLE BLASTER CORDLESS Mode D'emploi page 12

EN Operating instructions
7.2 Switching On and Off
Always guide the machine with both hands.
Switch on first, then guide the accessory towards the workpiece.
The machine must not be allowed to draw in additional dust and shavings. When
switching the machine on and off, keep it away from dust deposits. After switching off
the machine, only place it down when the motor has come to a standstill.
7.3 Working instructions
12
F
F
Press down lightly on the machine and
move over the surface by making oscillating
movements.
Correct direction of operation.
Less contact pressure = longer service life and
higher performance.
Note that excessive pressure will lead to
damaging the Bristle Blaster
break of tooth belt.
®
BRISTLE BLASTER CORDLESS
®
Belt and even