Pre-Operation Inspection - Carbest 92601 Manuel De L'utilisateur

3. PRE-OPERATION INSPECTION

WARNING!
Be sure to check the generator on a level surface with the engine stopped
• Ensure the generator is on a level surface
• Engine oil inspection:
WARNING!
Using non-detergent oil or 2-stroke engine oil could shorten the generator's life.
1. Loosen the cover screws and remove the maintenance cover (Refer to Fig. 3.0 for CI 1000 and Fig. 3.1 for
CI 2000 / CI 3000)
2. Remove the oil filler cap and wipe the dipstick clean (Refer to Fig. 3.2 for CI 1000 /CI 2000 / CI 3000).
Check the oil level by inserting the dipstick into the filler neck without rotating it.
3. If the level is low, fill to the upper limit of the oil filler neck with the recommended oil.
4. Reinstall the maintenance cover and tighten the cover screws.
Maintenance cover
Cover screw
Fig. 3.0
GB
51