Jcorsair1: Corsair Connector - MSI MEG Z690 ACE Manuel D'utilisation

JCORSAIR1: CORSAIR Connector

The JCORSAIR1 connector allows you to connect the CORSAIR Individually
Addressable Lighting PRO RGB LED strips 5V or CORSAIR RGB fans with the CORSAIR
fan hub. Once all items are connected properly, you can control the CORSAIR RGB
LED strips and fans with MSI's software.
CORSAIR RGB LED fan
CORSAIR Lighting Node PRO Connection
⚠
Important
∙ Fans must start at 1 and continue in series. 1 > 2 > 3 > 4 > 5 > 6. Any fan not
connected in series will break communication and the RGB LED lighting function will
not work.
Quantity of RGB LED Fans or RGB LED Lighting PRO strips supported may differ
∙
between models. Please refer to the motherboard specification.
∙ CORSAIR RGB LED Fan and CORSAIR Lighting Node PRO can't be used at the same
time.
1
3
CORSAIR RGB Fan Connection
SYS_FAN
4
5
6
SYS_FAN
SYS_FAN
1
JCORSAIR1
+5V 2 Data
Ground
SATA power
SYS_FAN
3
2
1
SYS_FAN
SYS_FAN
JCORSAIR1 connector
Overview of Components
JCORSAIR1 connector
47