Specifications - Cleveland PS20W Guide Du Propriétaire

SPECIFICATIONS

Model #
Stove Weight
[LBS (kg)]
Stove Dimenions LxWxH
[in. (cm)]
Air Inlet Pipe Diameter
[in. (mm)]
Air Outlet Pipe Diameter
[in. (mm)]
Pellet Hopper Capacity
[LBS (kg)]
Fuel
Heats approximately [ft
Carbon Monoxide Produced (g/hr)
Pellet Consumption Rate High [LBS/HR (kg/HR)]
Pellet Consumption Rate Medium [LBS/HR (kg/HR)]
Pellet Consumption Rate Low [LBS/HR (kg/HR)]
Automatic Mode Duration [minimum hours
(maximum hours)]
Stove Efficiency
Rate [BTU/HR (kW)] - HIGH
Rate [BTU/HR (kW)] - MED
Rate [BTU/HR (kW)] - LOW
Electrical Supply Requirements [Voltage / Frequency
/ Phase]
Electric Current During Lighting Phase [Amperes]
Auger Motor R.P.M.
This manual describes the installation and operation of the brand "Cleveland Ironworks" wood pellet fire stove.
This stove meets the applicable U.S. Environmental Protection Agency's emission limits for pellet fired heaters sold
after 2020.
*BTU input/output will vary, depending on the brand of fuel you use in your Stove
** Depending on climate zone. Variations in climate and location affect attributes such as stove efficiency
and CO produced.
Cleveland Iron Works Wood Pellet Fire Stove
DIMENSIONS
OPERATION SPECIFICATIONS
2 (m 2 )]**
ELECTRICAL SPECIFICATIONS
PS20W
143.3 (65)
18.25" x 20" x 28.5"
(46.36 x 50.8 x 72.4)
1.25" (32)
3" (80)
17.6 (8)
Wood Pellet
431-646 (40-60)
0.00
2.95 (1.34)
1.39 (0.63)
1.21 (0.55)
7 (13)
86.5%
21,064 (6.17)
10,249 (3.00)
9,072 (2.66)
120V / 60 Hz / Single
3.3
2.4
3
Operating Instructions and Owner's Manual