Malfunctions - JAC PRO + Notice D'utilisation Originale

10 MALFUNCTIONS

WARNING: The machine must be isolated from the power supply before attempting any work on it.
Problem
The machine will not start
The motor is humming but will not start
The chain jumps and creaks
Troughs do not invert
Check the electric power supply.
Check the thermal cut-out.
Check that the emergency stop button has not been
activated.
Check that the start button has been operated.
Check the power supply, a phase may be down.
Check chain tension.
Check for correct lubrication.
Check the condition of sprockets.
Check troughs are not distorted.
Check the inverting cam.
Should the problem persist, please contact your technician.
Check
13
English