Publicité
Les langues disponibles
Les langues disponibles
Please read this instruction manual before use.
Please check when open the package
NOTICE
Please follow this manual to operate strictly. Don't open it yourself. This product
should be repaired by qualified person if have any problem.
Please keep this product in dry air. Don't use it under rainy or wet or dusty
conditions.
Fixed installation. Prevent this product from strong vibration or impact. Don't use
it under shaking conditions.
Prevent the other things to enter into the products to cause some problem.
Please make sure the exhaust channel is no problem
during working
Please take notice that the plug is connected to the socket fixedly before turn on
the power.
Don't turn on or off this lighting frequently because it will shorten laser using age.
Try not to keep it work for so long time.
Based on semiconductor laser speciality, it need to turn off for 15 minutes after
using two hours. And then reuse until it become cooling.
Don't use any telescope to observe laser because it will become dangerous.
Don't touch the products and pull the power cable powerfully with wet hands.
The distance between lighting and objects is at least 1M.
There isn't any parts for user to repair in this product. Don't open it.
When the brightness of semiconductor laser becomes darker or other destroy,
please contact the dealer immediately.
Please notice anti-quake when re-shipping. It is better to use original packing.
WARNING
Please make sure the power has been cut off when do any installation and
repair.
This lighting laser danger rating is Class III B. It is dangerous to observe in the
beam of light directly. The minimum irradiated distance is 13CM and the longest
irradiated time is below 10 seconds.
Please make sure the distance between lighting and flammable things is at least
0.5M.
MAINTENANCE
Please maintain the products regularly. Using cotton stick dipped into alcohol to
clean the glass to optimize light output. Don't use wet clothes or other chemical
solvent to clean glass. The times of clean should be based on the lighting
operation frequency and arrounding circumstances. We suggest cleaning it per
20 days.
Please use clean towel to scrape the face of metal case, check and clean the
exhaust channel regularly.
DECLARATION
GB - INSTRUCTION MANUAL
2
Publicité
