Product Identification; Product Description; Parts Supplied; Intended Use - CAMPAGNOLA SPEEDY Mode D'emploi

3.1

Product identification

The tool identification details are printed on the back of the shear.
3.2

Product description

The product has been designed for cutting or pruning branches with a maximum diameter of 25 mm, depending on the
wood type, in orchards, vineyards, etc. It is battery operated and is composed of a blade, an anvil, a lithium battery, a
battery charger, a toolbox and other components.
Simple to use, it is 8/10 times more efficient than manual shears.
The pruning quality is significantly better than that performed manually.
WARNING!
The tool has been designed and manufactured exclusively for the purposes mentioned above.
3.3

Parts supplied

- Electric pruning shear
- 2 Lithium batteries
- Battery charger
- Quick guide
- Tool set
3.4

Intended use

The tool has been designed for cutting and pruning according to the above-described manners and limits.
Any different use is not allowed. A non-limiting example of different use is cutting objects made of metallic or rubber mate-
rials, fabrics, synthetics, meat or food, stones, pieces of cement, glass or glass compounds, carbon fiber.
WARNING!
• Any other use must be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and
bystanders and damages to equipment and things.
3.5

Tool composition

Pos. Denomination
1
Blade
2
Anvil
3
Blade pin
4
Trigger
5
ON/OFF button
6
Lubrication hole
7
Recharge connectors
8
LED light indicator
9
Recharge adapter
10
Release and extraction plates
11
Battery contacts
12
Battery
13
Battery charger
Page 22
Function
Is the cutting blade
Holds back the branch
The cutting blade rotates on it
Operates the shear
Switches the shear on and off
Allows to lubricate the blades
Connect the battery charger to the battery
Shows the battery charge status
Allows to connect the battery charger to the socket
Allow to insert the battery into the shear or to remove it
Connect the battery to the shear
Allows to operate the shear
Charges the battery
Use and maintenance manual – Translation of
original Instruction. : 02 date 12/11/2020