Product Identification; Product Description; Parts Supplied; Intended Use - CAMPAGNOLA STARK M Manuel D'utilisation Et D'entretien

Product identification

The tool identification details are printed on the back of the shear.

Product description

The product has been designed for cutting or pruning branches with a diameter equal to or less than 32 mm (STARK M
model) or 37 mm (STARK L model), in orchards, vineyards, etc. It is battery operated and is composed of a blade, an anvil,
a lithium battery, a battery charger, a toolbox and other components.
Simple to use, it has a performance being 8/10 times superior to the one of the hand shears.
The pruning quality of the is much better than when carried out manually.
WARNING!
The tool has been designed and manufactured exclusively for the purposes mentioned above.

Parts supplied

- Electric pruning shear
- 2 Lithium batteries
- Battery charger
- Use and Maintenance manual
- Tool set

Intended use

The tool has been designed for cutting and pruning according to the above-described manners and limits.
WARNING!
• Any other use must be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
•
If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and
bystanders and damages to equipment and things.

Tool composition

Pos. Denomination
1
Blade
2
Anvil
3
Blade pin
4
Trigger
5
ON/OFF button
6
Lubrication hole
7
Recharge connectors
8
Led light indicator
9
Release and extraction plates
10
Battery contacts
11
Battery
12
Battery charger
13
Display
Page 22
Function
Is the cutting blade
Holds back the branch
The cutting blade rotates on it
Operates the shear
Switches the shear on and off
Allows to lubricate the blades
Connect the battery charger to the battery
Shows the battery charge status
Allow to insert the battery into the shear or to remove it
Connect the battery to the shear
Allows to operate the shear
Charges the battery
Shows all information about the shear status
Use and maintenance manual – Translation of
original Instruction.: 00, Date 10/10/2019