Chauvet Q-Spot 460-LED Mode D'emploi page 3

EN
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
Password
The Q-Spot 460 LED will work with a DMX controller using a regular
DMX serial connection.
www.chauvetlighting.com.
The Q-Spot 460 LED uses a regular DMX data connection for its DMX
personalities: PERSON1 and PERSON2. See the User Manual to connect
and configure for DMX operation.
The Q-Spot 460 LED uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for Master/Slave
operation.
Overhead Mounting
Button
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following password by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
A DMX
Function
3
Q-Spot 460 LED QRG
Primer is available
Floor Mounting
from