Before Use - Bertazzoni REF24BMBPNB Manuel D'installation Et D'utilisation

5. BEFORE USE

5.1 Before use
Before first use, you must allow the fridge to settle
for at least twenty-four hours prior to switching
the power on.
It is recommended that you clean the interior of
the appliance prior to first use using a solution of
baking soda and warm water, then thoroughly dry
the interior. The fridge may have an odor at its first
use. This will disappear as the appliance cools.
NOTE:
The appliance will start at 41 °F (5°C) for
the fridge and 0 °F (-18 °C) for the freezer
and work continuously until it comes down
to the correct temperature. If the appliance
is switched off, you should allow five
minutes before switching it on again in
order to prevent unnecessary damage to
the compressor. Never store flammable or
explosive items or strong corrosive acids
or alkalis in the appliance. This fridge cools
your food by making the inside back of the
cavity cold. It is normal for frost to build up
on this surface; it then dissipates and drains
through a small drain at the bottom, where
it evaporates harmlessly. The presence of
frost at the back does not mean that the
fridge is malfunctioning.
EN
13