Videotec SW164OSM Manuel D'instructions page 68

The generic parameters which define the functioning of the whole video system and concern all operators
are set at matrix level.
Change of language
Selection of the national language
Input and output selection
Block of some inputs
Block of some outputs
Block of the up/down keys
Selection of the inputs visible on up/down
Definition of the switching cycles
Alarms
Description of the alarm types, contacts and
switching cycle groups
Configuration of the reset types
Enabling of the reset from keyboard
Alarm buzzer
Password
Set the passwords
Disable the passwords
Configuration :
The configuration must be carried out on all keyboards (menu
1.Language) and on the matrix (menu 1.Language).
Configuration :
menu 5.Enablings of the keyboard : if some inputs are disabled
since the operator has not to look over them, it is better to block
also the up/down keys (5.Enablings, Keys).
menu 5.Enablings of the keyboard ; if the installation is
controlled by more operators, it is advisable to block the outputs
which each operator cannot see directly on a monitor.
menu 5.Enablings, Keys of the keyboard.
menu 5.Active inputs of the matrix.
menu 2.Switching cycles of the matrix.
Configuration :
menu 3.Alarms of the matrix and connected submenus.
menu 3.4 Alarm reset of the matrix
If enabled on the menu 3.4 Alarm reset of the matrix, the reset
from keyboard can be accompanied by the request for a reset
password : this password is defined at keyboard level. It can be
different for each of the operators, and eventually disabled.
menu 3.6 Other parameters of the matrix ; menu 8.Buzzer of
each individual keyboard
Configuration :
menu 6.Passwords of each keyboard
menu 6.Passwords of each keyboard : set the password to
000000.
Page 31 SW164OSM 9901