Laica HTD8813 Instructions Et Garantie page 16

English
EN
All the function symbols The batteries are flat.
(self-test) flash on
the display and the
thermometer switches off.
N.B. If the appliance does not resume its correct functioning despite the checks performed, contact your dealer.
DISPOSAL PROCEDURE
The symbol on the bottom of the device indicates the separated collection of electric and
electronic equipment (Dir. 2012/19/Eu-WEEE). At the end of life of the device, do not
dispose it as mixed solid municipal waste, but dispose it referring to a specific collection
centre located in your area or returning it to the distributor, when buying a new device of
the same type to be used with the same functions.
If the appliance to be disposed of is less than 25 cm, it can be returned to a retail location
that is over 400 m² without having to purchase a new, similar device. This procedure of separated
collection of electric and electronic devices is carried out forecasting a European environmental policy
aiming at safeguarding, protecting and improving environment quality, as well as avoiding potential
effects on human health due to the presence of hazardous substances in such equipment or to an
improper use of the same or of parts of the same.
Caution! The wrong disposal of electric and electronic equipment may involve sanctions.To correctly
dispose of batteries (Dir. 2013/56/Eu) do not throw them into household waste but rather dispose of
them as special waste at specialised recycling centres.
For more information about disposal of used batteries, contact the store where you purchased the
equipment containing the batteries, the municipality or the local waste disposal service.
WARRANTY
This equipment is covered by a 2-year warranty starting from the purchase date, which has to be
proven by means of the stamp or signature of the dealer and by the fiscal payment receipt
that shall be kept enclosed to this document.
This warranty period complies with the laws in force and applies only in case the consumer is an
individual. Laica products are designed for domestic use only; therefore, their use for commercial
Replace the batteries.
If the problem reoccurs after the
batteries are replaced, the thermometer
mechanism is damaged. Contact the
dealer.
30
purposes is forbidden. The warranty covers only production defects and does not apply, if the damage
is caused by accidental events, misuse, negligence or improper use of the product.
Use the supplied accessories only; the use of other accessories invalidate the warranty cover. Do
not open the equipment for any reason whatsoever; the opening or the tampering of the equipment,
definitely invalidate the warranty.
Warranty does not apply to parts subject to tear and wear along the use, as well as to batteries, when
they are included. Warranty decays after 2 years from the purchase date. In this case, technical service
interventions will be carried out against payment. Information on technical service interventions, under
warranty terms or against payment, may be requested by writing at info@laica.com.
Repair or replacement of products covered by the warranty terms are free of charge. In case of faults,
refer to the dealer; DO NOT send anything directly to LAICA.
All interventions covered by warranty (including product replacement or the replacement of any of
its parts) shall not be meant to extend the duration of the original warranty period of the replaced
product. The manufacturer cannot be made liable for any damages that may be caused, directly or
indirectly, to people, things and pets resulting from the inobservance of the provisions contained in
the suitable user manual, especially with reference to the instructions related to installation, use and
maintenance of the equipment.
Being constantly involved in improving its own products, Laica reserves the right to modify its product,
totally or partially, with reference to any production need, without that this involves any responsibility
whatsoever by Laica or its dealers.
STANDARDS
The device complies with the following standards:
EN 60601-1-11, EN ISO15223-1.
Manufactured by:
Hetaida Technology Co., Ltd. 4F, BaiShiDa High-Tech Park, Xiang Dong
Industrial Area, DaLing Shan Town, Dong Guan City, Guang Dong, China.
Wellkang Ltd, Suite B, 29 Harley Street LONDON W1G 9QR, England, United Kingdom
Distributed by: Laica S.p.A.
Viale del lavoro, 10 – 36021 Barbarano Mossano (VI) – Italy
Phone: +39.0444.795314 - www.laica.com
Made in China
English
EN ISO80601-2-56, EN 60601-1, EN 60601-1-2,
31
EN