Automatic Entry Or Exit - quiko QK-CE220CT Instructions Pour L'installation Et Manuel Du Propriétaire

This solution is recommended when you want to allow entry to a reserved area, entering or leaving without using the recogni-
tion commands, allowing transit of vehicles in just one direction.
When the vehicle is on loop S0
the device receives consent
from loop S1 to move down.
When the vehicle is on top
of loops S0+S1 the device
moves down automatically.
When the vehicle is no longer
on loop S2 the will move
back up.
Loops S1 and S2 also have a safety function in that they will not let the device move all the time the vehicle is on top.
- Connect the N.O. contact of the S0 loop receiver to input 27-29.
- Connect the N.O. contact of the S1 loop receiver to input 26-29
and the N.C. contact to input 21-29.
- Connect the N.O. contact of the S2 loop receiver to input 28-29.
- The dimensional values of the loops are only approximate.
We suggest installing the QUIKO QK-LDT2 metal mass detector.

10.2 AUTOMATIC ENTRY OR EXIT

DIMENSIONS
- 18 -
1 2 3 4 5 6 7 8 9 10
Setting the dip
switches