quiko QK-CE220CT Instructions Pour L'installation Et Manuel Du Propriétaire page 12

Index
1. INTRODUCTION
2. MAIN FEATURES
3. TECHNICAL SPECIFICATIONS
4. INSTALLATION SAFETY
5. INPUTS AND OUTPUTS
5.1 POWER TERMINAL BOARD CN6-CN1
5.2 LOW VOLTAGE OUTPUT COMMANDS TERMINAL BOARD CN2
5.3 INPUTS COMMAND TERMINAL BOARD CN3
5.4 TERMINAL BOARD FOR HEATING ELEMENT CN4
5.5 BURGLAR ALARM (Optional) or SHANK "UP" SENSOR (Optional)
6. DIP-SWITCH CONFIGURATION
7. ADJUSTING THE TRIMMERS
8. RADIO RECEIVER
9. HOW TO CONNECT DEVICES FOR SIMULTANEOUS OPERATION
10. EXEMPLES OF CONTROLLING ENTRANCES
10.1 CONTROLLED ENTRANCE OR EXIT
10.2 AUTOMATIC ENTRY OR EXIT
10.3 CONTROLLE
WARNINGS
You are recommended to fulfi l an installation that includes all the accessories required to guarantee operation according
to current standards and always using original QUIKO devices.
These devices must be used and installed in strict compliance with the instructions supplied by the manufacturer, who
cannot be held liable for any damages deriving from improper or unreasonable use.
QUIKO declines all forms of liability with regard to any errors possibly written in this handbook and reserves the right to
add any modifi cations considered necessary at any time without notice.
- 12 -
Pag.
13
13
13
14
14
14
14
15
15
15
16
16
16
16
17
17
18
20