Exemples Of Controlling Entrances; Controlled Entrance Or Exit - quiko QK-CE220CT Instructions Pour L'installation Et Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10. EXAMPLES OF CONTROLLING ENTRANCES
This solution is recommended when you want to enter a reserved area in just one direction activating a recognition com-
mand (radio control, proximity key, magnetic keys, etc.).
The vehicle approaches
the reserved area.
Loops S1 and S2 also have a safety function in that they will not let the device move all the time the vehicle is on top.
- Connect the N.O. contact of the S1 loop receiver to input 27-29.
- Connect the N.O. contact of the S2 loop receiver to input 28-29.
- The dimensional values of the loops are only approximate.
We suggest installing the QUIKO QK-LDT2 metal mass detector.

10.1 CONTROLLED ENTRANCE OR EXIT

DIMENSIONS
- 17 -
When the vehicle is on loop S1 the
device will move down only after a
recognition command.
If the device is moving back up
and you want to lower it again
the vehicle must be on loop S1
and then you must activate the
recognition command.
When the vehicle is no longer
on loop S2 the device will move
back up.
1
2
3
4 5 6
7 8 9 10
Setting the dip
switches

Publicité

Table des Matières
loading

Table des Matières