IKA S 10 N - 5 G Informations Techniques page 7

Source language: German
Explication of warning symbols
Safety instructions
Product information
Application instructions
Unpacking
Spare parts list
Maintenance and cleaning
Warranty
Technical Data
Explication of warning symbols
DANGER
WARNING
CAUTION
NOTICE
CAUTION
• Read the operating instructions in full before starting up and
follow the safety instructions.
• Keep the operating instructions in a place where they can be accessed by
everyone.
• Ensure that only trained staff work with the appliance.
• Follow the safety instructions, guidelines, occupational health and safety
and accident prevention regulations.
CAUTION
must be cooled before it can be removed from the drive.
NOTICE
flange correctly or the medium is hot, it can become extremely hot.
WARNING
CAUTION
be processed. Otherwise there is a risk of splashing and evaporation of
liquids; body parts, hair, clothing and jewelry getting caught.
• The work has to be interrupted immediately if you notice unusual noise
and/ or increasing emission of liquid from the upper, sidewise rinsing
drilling. The bearings must be controlled, and replaced if necessary.
• Note the operating instructions of the disperser unit.
• Abrasion of the dispersion equipment or the rotating accessories can
get into the medium you are working on.
• Do not use any damaged dispersion tools e.g. with hairline cracks or splits.
NOTICE
Content
Indicates an (extreme) hazardous situation, which, if
not avoided, will result in death, serious injury.
Indicates a hazardous situation, which, if not avoid-
ed, can result in death, serious injury.
Indicates a potentially hazardous situation, which, if
not avoided, can result in injury.
Indicates practices which, if not avoided, can result in
equipment damage.
Burns hazard!
Safety instructions
The dispersion tool may heats up during operation. In
particular in the processing of hot medium, the tool
When in operation the dispersion tool can become
hot. If the dispersion tool is not inserted into the drive
Don't touch rotating parts during operation.
Wear your personal protective equipment in accor-
dance with the hazard category of the medium to
Never run the dispersion tool dry. Without cooling by
the medium the bearing will be destroyed.
EN
Page
7
7
8
8
8
8
9
9
10
7