Nibe SMS 40 Manuel Installateur page 15

Settings
Space for
SIM card
Space for battery
Space for SIM
card
Installing SIM card:
1.
Carefully slide the holder to one side.
2.
Fold up the holder, then place the SIM card into the
card holder cover.
If you want SMS 40 to send SMSs in the event of a power
cut, carry out the following:
Install an alkaline 9V battery on the circuit board in
■
SMS 40.
Position the jumper according to the image below.
■
SMS 40 | GB
Caution
The pin code must be deactivated and if it is pay
as you go there must be credits on the card.
Jumper
Moved
15