Nibe SMS 40 Manuel Installateur page 16

Quick start guide
Program setting of SMS 40 can be performed via the
start guide or directly in the menu system.
1. Start the heat pump/indoor module and select
SMS 40 in menu 5.2 "system settings" (menu 5.2.4
"accessories" for NIBE F1345, F1355, VVM 225,
VVM 310, VVM 320, VVM 325 and VVM 500).
2. Go to menu 4.1.4 in your heat pump/indoor module
(menu 5.3.5 if your heat pump/indoor module has
software version 2041 or earlier) and add the mobile
numbers that are to have access to change and re-
ceive status information from the heat pump/indoor
module. Mobile numbers must include country code
e.g. +46XXXXXXXX.
3. If you wish to receive a SMS-message in the event
of the alarm mark the box to the right of the tele-
phone number.
phone number
NOTE
Telephone numbers provided must be able to
receive SMS messages.
16
sms 4.1.4
alarm receiver
Download the app
If the mobile telephone has the Android operating sys-
tem, the mobile application "NIBE Mobile App" can be
used. Using the app, incidents and temperatures are
presented graphically.
1. Enter Google Play
2. Search on NIBE Mobile App
3. Download
Or scan in the QR code below using your Android tele-
phone.
(requires scanner software in the phone).
SMS 40 | GB