Nibe SMS 40 Manuel Installateur page 12

General
With SMS 40 you can control and monitor your NIBE
heat pump using a mobile telephone via SMS messaging.
For this to work, SMS 40 must be equipped with a valid
GSM subscription.
The telephone used must support 2G. A pay as you go
card or a subscription work equally well. However a pay
as you go card must be regularly refilled to ensure con-
tinued use.
NOTE
Check that SMSs can be sent with the SIM card
to be used.
Deactivate if necessary. PIN for SIM card. This
can be done in a mobile telephone or by your
service provider.
Compatible products
■
F1145
■
F1155
■
F1245
■
F1255
■
F1345
■
F1355
■
F370
■ F470
Contents
1 x Unit box
1 x Antenna (2,5 m)
1 x Wall bracket
Caution
The climate unit's software must be the latest
recommended version or have a version number
greater than 3000. If not, download the latest
recommended software version for your product
to a USB memory device from
www.nibeuplink.com and install it.
12
English
■
F730
■
F750
■
VVM 225
■
VVM 310
■
VVM 320
■
VVM 325
■
VVM 500
■ SMO 40
Mounting
SMS 40 can be positioned lying on a flat surface or wall-
mounted. Where SMS 40 is wall-mounted, use the sup-
plied wall bracket.
NOTE
When wall mounting, the hole for the antenna
cable must be pointing downwards to prevent
water from entering SMS 40.
NOTE
SMS 40 must not be installed outdoors.
SMS 40 is supplied with a factory installed antenna. The
antenna section has a piece of self-adhesive tape that
can be used to secure the antenna, for example to a
window if coverage in the installation location is poor.
SMS 40 | GB