Mounting Of The Bikes On The Bike Carrier - PROUSER AMBER II Notice D'assemblage Et De Sécurité

MOUNTING OF THE BIKES ON THE BIKE CARRIER

Remove all parts from the bikes that could easily be lost (E-bike
batteries, bike pumps, speedometers, baskets, panniers, bicycle
seats etc.) during transport. These parts may become loose by
the increased air resistance and vibration and put other road users at
risk.
The first (and heaviest, max 20kg) bike has to be placed in the rear wheel holder
(the one which is the nearest to the car) and secured with the short frame holder
on the U-tube.
The frame holders are flexible to place on the U-tube, and are also flexible to
place on your bike. Try the first time which position in your situation works best
(and most stable affirmative is). It is important to place the frame holder as high
as possible, giving maximum stability.
Use the straps to secure the bikes. With these straps, any bike can be secured
easily without placing a load on the bike crank.
Place every next bike in opposite directions into the other wheel holders and
proceed as described above for the first bike.
Now secure the bikes using the long safety
belt. Run the safety belt through the bike frame
and around the U frame and tighten firmly.
Secure the wheels using the supplied short
straps. One strap for the fixation of the rear
wheel and two straps for the front wheel (see
picture).
41