Comet FDX BLADE XL 7.14 14/200D Notice Technique - Utilisation Et Entretien page 19

EN
WARNING
CAUTION
• For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20% lower than
the machine's maximum performance.
• The engine's maximum power diminishes as the altitude and ambient temperature at which it is working increases
(there is a drop of about: 3.5% every 305 m/1000 ft above sea level and 1% every 5.6°C/42°F above 16°C/61°F). If
the high pressure water cleaner is used at a high altitude or with high ambient temperature please refer to the
engine's operating and maintenance manual to see if any precautions need to be taken.
• The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient temperature
of 16°C/61°F.
• If the high pressure cleaner is not connected to the water mains but takes water from a tank, in certain conditions
the thermostat valve can open and prevent the complete self-priming of the pump. In these cases, fit a rubber
hose into the hose connection of the thermostatic valve and bring the other end of the hose to the tank from
where the pump takes the water.
• The specifications and technical data are approximate. The manufacturer reserves the right to make all changes
to the machine it deems appropriate.
MOTORISATION
Fuel
Power
Nominal rotation speed - maximum
HYDRAULIC CIRCUIT
Maximum supply water temperature
Minimum supply water temperature
Minimum supply water flow rate (l/min - USgpm)
Maximum supply water pressure
Maximum priming depth
PERFORMANCE
Maximum flow rate (l/min - USgpm)
Nominal flow rate (l/min - USgpm)
Maximum pressure
Nominal pressure
Maximum reaction force on the spray gun
Sound pressure level - Uncertainty
Sound power level
Operator hand-arm vibration - Uncertainty
PUMP OIL
WEIGHT AND DIMENSIONS
Length x width x height (mm - in)
Weight
(1)
Measurements in agreement with EN 60335-2-79.
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.
SPECIFICATIONS AND TECHNICAL DATA
7.14 14/200D 9.16 16/200G 9.15 15/220G
YANMAR L70N HONDA GX270
Diesel
(kW - HP)
5,5 - 7,5 6,7 - 9,0
(RPM)
(°C - °F)
(°C - °F)
18 - 4,8 21 - 5,5
(bar - psi)
(m - ft) 0,5 - 1,7
14 -3,7 16 - 4,2
13,1 - 3,5 14,7 - 3,9
(bar - psi) 200 - 2900
(bar - psi) 190 - 2756
(N) 28 41
(dB(A))
(dB(A))
2
(m/s )
(mm - in)
(kg - lb) 48 - 106 50 - 110
(2)
Also see the corresponding oils table.
FDX BLADE XL / PRO
13.15 15/310G
LONCIN G390F HONDA GX390 HONDA GX390 LONCIN G390F HONDA GX390
Petrol
3400 - 3600
60 - 140
5 - 41
20 - 5,3
8 - 116
No
15 - 4,0
14 - 3,7
220 - 3191 310 - 4496
210 - 3045 290 - 4206
50 54
(1)
92,8 – 0,7
(1)
106
(1)
11 – 0,24
(2)
ENI MULTITECH THT
850x580x1050 - 33,5x23x41
48 - 106 50 - 110
13.16
15/280G
16/280G
9,6 - 13,0
21 - 5,5 20 - 5,3
0,5 - 1,7
16 - 4,2 15 - 4,0
14,7 - 3,9 14 - 3,7
280 - 4061
255 - 3699
51 50
52 - 115
EN
19