Attaching Covering Strips - Gaggenau RC 462 Instructions D'installation

2. Use a Torx screwdriver to align the depth of the ice
and water dispenser on the setting screws.
Use a ruler as positioning aid.
3. By moving by hand align the ice and water dispenser
exactly lateral and in the higth to ensure that the gap
is exactly the same all the way around.
4. Retighten the nuts on the setting screws to fix the
adjustment.
5. Slide in the covering frame provisionally to check
the adjustment.
The lateral spacing around the ice and water
dispenser must be exactly the same. Correct if
necessary.
34
6. Slide in the covering frame and push firmly.
7. Insert the covers.
8. Insert the water capture bowl.

Attaching covering strips

(only for the wine storage cabinet)
1. In certain circumstances, if the frame width is narrow,
the side of the covering strip has to be shortened.
To determine the required length of the side, lay trial
pieces next to the covering strip.