Removing/Changing The Sealing Mat - Gaggenau RC 462 Instructions D'installation

10. Attach the hinges to the appliance. Exchange the
hinges crosswise!
11. Screw the door to the hinges.
12. Tighten the screw. In addition, set the screw from I to
0.
13. Attach the hinge covers.

Removing/changing the sealing mat

Freezers are fitted with a sealing mat at the factory for
side-by-side installation.
If a single appliance is installed, the sealing mat is not
required and can be removed.
The sealing mat is essential for side-by-side installation.
If the door hinges were fitted to the other side of the door,
the sealing mat must be attached to the other appliance.
Always attach sealing mat to the right side of the
appliance situated on the left.
29