GB
rections in the chapter "Filling the
Pump".
Filling the pump
Fill up the house water dispenser every
time before you start using it. This will en-
sure an immediate start. Running dry will
destroy the pump.
•
Open the filling screw (2) on the do-
mestic water pump.
•
Fill with water to the fill point such that
water starts to run out of the filling
screw (2) hole.
•
Retighten the filling screw (2).
Operational start-up
•
Check that the electrical connec-
tion is 230V ~50Hz
•
Check the proper status of the
electrical plug socket and make
sure that the plug socket is suf-
ficiently fused (at least 10 A). In-
sert the pump plug into the plug
socket and the pump is ready
for operation.
•
Make sure that moisture or wa-
ter never come in contact with
the mains connection.
There is a risk of electrocution.
Starting the unit
•
Connect the power cable of the auto-
A
matic switch (
ply.
•
If water is demanded, the automatic
switch will activate automatically if the
pressure falls in the pressure vessel
(5) and switch the pump on. Once the
water stops flowing the vessel pres-
sure will increase and the automatic
switch will switch the pump off.
26
8) to the power sup-
•
Set the On/Off switch (
the unit.
Maintenance
Instructions
Clean and maintain your equipment regu-
larly. This will guarantee its performance
and long durability.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Pull out the power plug before every
maintenance operation. There is a
risk of electrocution or of injury from
moving parts.
General cleaning instructions
A reduction in pump feed output may be
indicative of a blockage. In case the unit
clogs up, remove the suction and pres-
sure hoses. Dismantle the automatic
switch (20) and flush water through the
threaded hole on the pump in order to re-
move the foreign body.
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our ser-
vice centre.
Storage
•
Keep the equipment clean, dry and out
of the reach of children.
•
To keep the pump when not in use,
open the draining screw (13) and
carefully drain the pump.
A
7) to turn on