Grizzly HWW 3819 Inox Inox Traduction De La Notice D'utilisation Originale page 24

GB
abrasive particles such as sand.
The dispensing of aggressive,
abrasive (grinding effect), cor-
rosive, combustible (e.g. motor
fuels) or explosive liquids, salt
water, cleaning agents and
foodstuffs is not permitted. Liq-
uid temperature not to exceed
35°C.
• Store the equipment in a dry
place and out of reach of chil-
dren.
Caution! To avoid damage to
the equipment and any pos-
sible person injury resulting
from this:
• Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of
the manufacturer. Before initial
operation, have a specialist
check that the required electri-
cal protection measures are in
place.
• Do not carry or fix the equip-
ment by the cable or pressure
line.
• Protect the equipment from
frost and from running dry.
• Use only original accessories
and do not carry out conversion
work on the equipment.
• Please read the notes in the op-
erating instructions on the topic
of "maintenance and cleaning".
Any measures above and be-
yond these, particularly opening
the equipment, are to be car-
ried out by an electrician. In the
case of repairs, always contact
our service centre.
24
Electrical safety:
Caution: to avoid accidents
and injuries from electric
shocks:
• After erection, the mains plug
must be freely accessible when
the equipment is in operation.
• Before operating your new
pump, have a specialist check:
- The earthing, the protective
multiple earthing; the residual
current circuit breaking must
be compliant with the safety
regulations of the energy sup-
ply company and function with-
out fault,
- The protection of the electri-
cal plug connections from
the wet.
- If there is a risk of flooding,
fix the plug connections in
an area that is safe from
flooding.
• Ensure that the mains voltage
matches the specifications on
the rating plate.
• The electrical installation shall
be according to national wiring
rules.
• Connect the equipment only
to a socket with a residual cur-
rent protection device (residual
current circuit breaker) with a
rated current of not more than
30 mA; minimum fuse 10 am-
peres.
• Before each use, check the
equipment, cable and plug for
damage. Defective cables are
not to be repaired, but rather
replaced by new ones. Have
any damage to your equipment
repaired by a specialist.
• If the power cable for this
equipment is damaged, it must