Status Information; Troubleshooting; Troubleshooting Chart - Hama WLAN Router 300 Notice D'utilisation

g

Status information

‹ Click the "Status" button on the home page.
In the menu on the left-hand side you can display information in
various sub-menus on, for example, Internet status, device status or
active DHCP clients. A package counter is available under the menu
item "Statistics".

Troubleshooting

Troubleshooting chart

Before sending the device to after-sales service, use the following
table to check whether you can remedy the problem yourself.
Fault/problem
Power LED
does not come
on .
No connection
can be made to
the device for
configuration.
86
Possible cause
Mains adapter not
connected cor-
rectly.
7
No voltage from
the mains socket.
Device is defective.
LAN cable not con-
nected correctly.
Wrong IP address.
Wrong subnet
mask.
Firewall software is
activated.
Troubleshooting
Remedy
Make sure the mains
adapter is plugged into
the mains socket and
correctly connected to
the device.
Check the fuses.
Contact after-sales
service.
Check that the RJ45
network cable is correctly
connected.
Make sure that the IP
address matches the
address range of your
network.
Make sure that the sub-
net mask matches the
address range of your
network.
Deactivate the firewall
for the duration of the
configuration.
WLAN Router 300