Publicité
2. Place a suitable pan on the cooking zone that you wish to use.
> Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed, select a To unlock the controls
relevant zone select key by pressing
Selected will stay fully it.
4. Select the powe
level by pressing the "
「
"key(4).
5. The powe
level will start at 5.P
「
powe
levels from 5 to 9 in numerical order.Pressing the "-"key will operation.
「
take the powe
straight from 9 to O
「
> If you don't choose a heat setting within 1 minute, the induction
hob will automatically switch off. You will need to start again at step
1.
> You can modify the heat setting at any time during cooking
、u -:::
If the display flashes :=-一 、 alternately with the heat setting
This means that:
> you have not placed a pan on the cor
> the pan you're using is not suitable for induction cooking o
> the pan is too small or not properly cent
No heating takes place unless there is a suitable pan on the cooking If you a
zone.
The display will automatically turn off afte
pan is placed on it.
When you have finished cooking
1. Touching the relevant zone select key (1 ) that you wish to switch 2.Touch the Timer k
off.
2. Press the "-"key will desrease the powe
the"+" and
"-" at the same time, the power level will desrease to O straight inc
away.
3. Beware of hot surfaces
"H " will show which cooking zone is hot to touch. It will disappea
when
the surface has cooled down to a safe tempe
used
as an energy saving function if you want to heat further pans, use the 5. Buzzer will bips for 30 seconds and the time
hotplate that is still hot.
Actived the boost function
1. Select the heating zone by touching the zone select key (1 }
2. Touching the boost control key6 } " "the zone indicator show
"P." and the power reach Max.
Cancel the boost function
1. Touching the relevant zone select key( 1 ) that you wish to cancel.
1a. Touching the "-"key( 4 ) to cancel the Boost function, then the
cooking zone will revert to level 9.
1b. Touching"-" and "+"control togethe
cooking zone switch off and the boost function cancel automati cally Touch and hold the " _ " or "+"cont rol of the timer will decrease or
> The function can work in any cooking zone.
> The cooking zone returns to level 9 after 5 minutes.
Safety mode (Child lock)
> You can lock the controls to prevent unintended use ( for example
children accidentally turning the cooking zones on).
> When the controls are locked, all the controls except the OFF
control a
e disabled.
「
"雷
" key (1).The symbol O .
回
「"器
' k 顽 0
essing the "+"will count up the in an emergency, but you shall unlock the hob first in the next
「
.
ect cooking zone or,
「
,
「
ed on the cooking zone.
「
1 minutes if no suitable 1.Make sure the cooklop is turned on.
「
to "O" level, or press 3. Set the time by touching the"-" o「"+" control of the timer.
「
「
ature. It can also be 4. When the time is set, it will begin to count down immediately. The
「
at the same time . the
「
To lock the controls
Touch the key lock control for 3 seconds. The timer indicato
show "Lo "
1. Make sure the Induction hob is turned on
2. Touch and hold the key lock control to
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable
except OFF , you can always turn the hob off with the OFF control
Using the timer
You can use the time
in two different ways:
「
> You can use it as a minute minder. In this case, the timer will not
turn any cooking zone off when the set time is up.
·
> You can set 1t to turn one cooking zone off afte
> You can set the timer for up to 99 minutes.
Using the timer as a minute minder
e not selecting any cooking zone
『
Note: you can use the minute minder even if you're not selecting any
cooking zone.
I ".
叩琶
flashing and "1 O" will show m the timer display.
Hint: > Touch the"-" or"+" control of the timer once to decrease or
ease by 1 minute.
「
> Touch and hold the " -"or "+" control of the time
increase by 1 O minutes.
> Touching the"-" and"+" together, the timer is cancelled, and
the timer indicator will turn off.
display will show the remaining time .
when the setting time finished.
Setting the time
to turn one o
『
『
If the time
is set on one zone:
『
1. Select the
elevant cooking zone which is working by touching the
「
zone select key ( 1 ).
"回
2. Press the Timer keym
you can set the timer at this point.
3. Using the "+" and " -"buttons, you can realize the setting of timing
from 1 to 99 minutes.
Hint: Touch the"-" or"+" control of the time
inc
ease by 1 minute.
「
inc
ease by 1 O minutes.
「
Touching the " -" and "+" together, the timer is cancelled, and the
timer indicator will turn off.
4. When the time is set, it will begin to count down immediately. The
display will show the
emaining time and the timer indicator flash
「
for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
5. When cooking timer expi
es, the cor
「
be switch off automatically.
Other cooking zone will keep operating if they are tu
previously.
will
「
a while
「
the set time is up.
「
The minder indicator will start
to decrease o
「
「
indicator will turn off
「
more cooking zones off
the timing indicator flashes, and
，
once will dec
ease or
「
「
6
沁
esponding cooking zone will
「
ned on
「
Publicité
