Aquasmart™ Controls - Fisher & Paykel AquaSmart WL4027P Instructions D'installation Et Guide D'utilisation

AquaSmart™ controls
US
20
CA
SmartTouch™ control dial (selected models only)
The SmartTouch™ control dial provides easy and efficient cycle selection. As you rotate the dial,
the cycle selected will be illuminated, as will the default settings for that cycle on the right of the
control panel.
SmartTouch™ buttons
The smooth, easy clean buttons require only a gentle touch to activate.
Digital display screen
The digital display screen provides feedback on how long the wash cycle has to go to keep you
informed throughout the cycle. The screen also displays your DELAY START selection, should you
choose one. The delayed time remaining will show on the screen until the machine starts. The
screen will also display messages to help you with the overall running of your washer.
Time to go
Your AquaSmart™ washer displays the approximate time the cycle has remaining, so that you can
tell at a glance when your washing will be finished. Once you have selected your wash cycle and
options, the time the selected cycle will take to complete will be displayed. Please be aware that
a number of factors influence the overall cycle time, eg the water flow rate, load size and wash
cycle selection, therefore times will vary.
Keylock mode
Keylock can be used to lock the buttons on your AquaSmart™. This will avoid accidental button
pushes from items left on the lid of the washer as well as touches from any little fingers.
To turn Keylock mode ON or OFF:
Touch POWER, then touch and hold the KEYLOCK button for 2 seconds
■ ■
Note: when activated, the light above the KEYLOCK button is illuminated.
If Keylock mode is activated:
To turn your washer on, touch and hold the POWER button for 2 seconds. This will activate the
■ ■
control panel. Keylock will remain activated but will allow you to select your wash cycle options
and start the cycle.
To PAUSE your washer at any time during the cycle, touch and hold the START/PAUSE button for
■ ■
2 seconds or touch the START/PAUSE button twice in quick succession.
To STOP your washer and power off, simply touch the POWER button.
■ ■