Operating instructions
US
14
CA
Before you do your first wash
For best performance your AquaSmart™ should be installed by a qualified or experienced installer.
Before you start, it is a good idea to go through the following checklist:
Has the base packer been removed?
1
Is the drain hose threaded through the 'U bend' hose guide (with no
2
more than ¾" (20 mm) extended) and hooked on to your standpipe
or tub / sink?
Is the hot hose connected to the hot valve marked 'H'?
3
Is the cold hose connected to the cold valve marked 'C'?
Is the washer leveled correctly, with the feet extended and cabinet
4
corners clear of the floor? Refer to pages 10 and 11.
Have you performed the installation test cycle? Refer to page 12.
5
Electric Shock Hazard
Read and follow the IMPORTANT SAFETY INSTRUCTIONS outlined in this
User Guide before operating this appliance, pages 3 – 5.
Failure to do so can result in death, electric shock, fire or injury to
persons.
WARNING!