Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Changing pre-set options
US
38
CA
Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the options to
suit your wash needs.
There are a number of pre-set options which can be altered:
Changing the COLD wash temperature to CONTROLLED COLD.
1
The out of balance recovery routine.
2
The number of beeps at the end of the cycle.
3
Resetting to factory default settings.
4
To enter Option Adjustment mode
Turn the machine on at the wall but do not touch POWER.
1
Touch and hold the KEYLOCK and START/PAUSE buttons
together for 3 seconds. You will hear 3 quick beeps
indicating you have entered Option Adjustment mode and
the machine will show the default setting for the COLD
wash temperature.
The diagrams on page 39 show how the wash cycle icons
relate to the options you can change on your washer
model.
Pages 40 – 42 explain the different options in more detail.
Use the dial and/or buttons on the control panel to make
2
your changes to the pre-set options.
Touch POWER to return to normal mode when you
3
have finished modifying your options. Your washer will
automatically remember your changes.
Fig.24 Entering Option
Adjustment mode
Publicité
Chapitres
Table des Matières
