When you have finished the cycle
Turn off the faucets to prevent the chance of flooding should
■ ■
a hose burst.
Unplug the washer from the power socket.
■ ■
Cleaning your AquaSmart™
Before you start cleaning your AquaSmart™ washer, ensure
that it is disconnected from the power (ie unplug from the
power socket), or that the Key Lock mode has been activated
(refer to page 20).
Cleaning the control panel topdeck and lid
Use a soft damp cloth to wipe all surfaces, and wipe dry. Avoid
using chemical or scouring cleaners, as these will damage the
paint and plastic surfaces of your washer.
Important!
The SmartTouch™ control dial (WL4027P model) and lid are not
designed to be removable for cleaning. Do not attempt to remove
the dial or lid.
Cleaning the detergent, fabric softener and bleach dispensers
Wipe out the detergent dispenser with a damp cloth.
The funnels (tops) of both the fabric softener dispenser and
the bleach dispenser click off easily. Simply place a finger down
the center and lift. The fabric softener and bleach dispenser
compartments are not removable and need to be wiped clean
periodically. If the siphon tube on either dispenser looks partially
blocked use a cotton bud to clean.
Important!
Ensure that the fabric softener and bleach dispenser funnels are replaced correctly after cleaning,
before you start your next wash.
Caring for your AquaSmart™ washer
Fig.35 Removing the
fabric softener funnel
Fig.36 Removing the
bleach funnel
US
43
CA