Aquasmart™ Controls - Fisher & Paykel AquaSmart Guide D'utilisation

AquaSmart™ controls
US
18
CA
SmartTouch™ control dial
The SmartTouch™ control dial provides easy and efficient cycle selection. As you rotate the
dial, the cycle selected will be illuminated, as will the default settings for that cycle on the
right of the control panel.
SmartTouch™ buttons
The smooth, easy clean buttons require only a gentle touch to activate. Use these to power
your washer on and off, start and pause your washer, select your wash options, activate
keylock and programme a delay start.
Digital display screen
The digital display screen provides feedback on how long the wash cycle has to go to keep
you informed throughout the cycle. The screen also displays your DELAY START selection,
should you choose one (if available on your model of washer). The delayed time remaining
will show on the screen until the machine starts. The screen will also display messages to help
you with the overall running of your washer.
Time to go
Your AquaSmart™ washer displays approximately how many minutes the cycle has remaining,
so that you can tell at a glance when your washing will be finished. Once you have selected
your wash cycle and options, the time the cycle will take to complete will be displayed. Please
be aware that a number of factors influence the overall cycle time, eg the water flow rate, load
size and wash cycle selection, therefore times will vary.
Keylock mode
Keylock can be used to lock the buttons on your AquaSmart™ when not in use. This will avoid
accidental button pushes from items left on the lid of the washer (eg washing baskets) as well
as touches from any little fingers.
To turn Keylock mode ON or OFF:
Touch POWER, then touch and hold the KEYLOCK button for 2 seconds
■ ■
Note: when activated, the light above the KEYLOCK button is illuminated.
If Keylock mode is activated:
To turn your washer on, touch and hold the POWER button for 2 seconds. This will activate
■ ■
the control panel. Keylock will remain activated but will allow you to select your wash cycle
options and start the cycle.
To PAUSE your washer at any time during the cycle, touch and hold the START / PAUSE button
■ ■
for 2 seconds or touch the START / PAUSE button twice in quick succession.
To STOP your washer and power off, simply touch the POWER button.
■ ■