Video Output Format; Setting Language Preference; Setting The Osd Language - Yamaha DVD-C950 Mode D'emploi

Getting Started
4 Press 34 to highlight one of the options
below:
PAL
Select this if the connected TV is a PAL
system TV. It will change video signals of
NTSC discs and output them in PAL
format.
NTSC
Select this if the connected TV is an NTSC
system TV. It will change video signals of
PAL discs and output them in NTSC
format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
formats (a multi-system TV). The output
format will be in accordance with the video
signals of the disc.
5 Select an item and press ENTER/OK.
Notes:
– Before changing the current TV
Standard setting, ensure that your TV
supports the 'selected TV type'
system.
– If the picture does not display
properly on your TV, wait 15 seconds
for auto recover to activate.
CHANGING PAL TO NTSC
1. ENSURE THAT YOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
OK
TIPS: To return to the previous menu, press 1.
To clear the menu, press SETUP.
12
CANCEL

Video output format

Disc TV Type
Format
NTSC PAL
NTSC
MULTI
PAL PAL
NTSC
MULTI
Note:
– When Scan mode is set to PROGRESSIVE,
CVBS/S-video output will depend on the
format of disc.
Step 4: Setting Language
Preference
You can select your own preferred
language settings.This player will
automatically switch to your preferred
language for you whenever you load a disc.
If the language selected is not available on
the disc, the disc's default language will be
used instead. The OSD language in the
system menu will remain once selected.

Setting the OSD language

GENERAL SETUP PAGE
DVD-AUDIO
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
DIVX(R) VOD CODE
Output Format
(Progressive ON)
Y P P CVBS/
B R
S-video
576p 480i
480p 480i
480p 480i
576p 575i
480p 575i
576p 575i
ENGLISH
FRANÇAIS
ESPAÑOL