HDMI VIDEO
Enables you to adjust the resolution
depending on the monitor you are using.
You can use this function only when the
HDMI output terminal is connected to a
HDMI-compatible component.
Notes:
– While HDMI video signals are being
output, component video is muted.
– For settings other than [AUTO], HDMI
video output may not display properly if
a resolution output setting not
supported by the HDMI-compatible
monitor you are using is set.
To return to the initial setting:
1 Press OPEN/CLOSE / to open
the disc tray.
2 Press
.
1
3 Press AUDIO.
Do not perform this operation while
playing back a disc on this player.
– When [DIGITAL AUDIO]is set to
[OFF] on this player, PCM signals are
still output if [HDMI AUDIO] is set to
[ON] and a HDMI connection is
established between the monitor and
receiver.
– When [DIGITAL AUDIO] is set to
[ALL] on this player, PCM signals are
still output if the monitor and receiver
only support the PCM format.
480P
480 progressive-scan video
576P
576 progressive-scan video
720P
720 progressive-scan video
1080I
1080 interlace video
AUTO
TIPS:
To return to the previous menu, press 1.
To clear the menu, press
Setting Examples
HDMI
VIDEO
480P
576P
720P
1080I
AUTO
*: Depending on the monitor you are using,
the monitor setting names may differ from
those shown above.
*1: If the monitor you are using has an
aspect ratio of 4:3 and is only capable of
either 480p or 576p resolution, select [4:3
PANSCAN] or [4:3 LETTER BOX].
*2: If the aspect ratio you desire is not
available, select the most suitable setting
from: [4:3 PILLAR BOX], [NL_STRETCH]
and [OFF].
*3: Depending on the monitor you are
using, this setting may appear as "Squeeze"
or "Full".
*4: 720P/1080I supports 60-Hz video
signals.
TRUE LIFE
Produces more dynamic picture by
increasing the picture contrast and the
color intensity. This function is available for
progressive scan output only.
0 to +5
SETUP
.
Setup Menu
Playback disc
Squeezed
16:9 video
TV
Monitor
shape
settings
Squeeze
Full
*1
16:9
Through
Squeeze
*4
Normal
16:9
Through
*4
Dot by Dot
The resolution is automatically selected
to match the monitor you are using. Set
[TV TYPE], [PSCAN FORMAT] and your
monitor setting to match the selected
resolution.
4:3 video
Monitor
PSCAN
settings
FORMAT
*3
Normal
*2
OFF
Through
Dot by Dot
4:3
*3
Through
4:3 PILLAR
Squeeze
*2
BOX
33