Traktor Le Installation; Peripheral Connections - Reloop Digital Jockey 2 Master Edition Mode D'emploi

3. TRAkTOR LE SOFTWARE INSTALLATION
In the Traktor folder carry out the setup file corresponding to your system. Install Traktor LE manu-
ally.
Note for Mac users: Please manually execute the Traktor LE installation fi le on the provided in-
stallation disc.
Upgrade for Traktor PRO:
With the provided Traktor LE version you have the benefit of purchasing the extensive Traktor Pro
version at a preferential price. Current conditions regarding the prices can be found on www.native-
instruments.com.

4. PERIPHERAL CONNECTIONS

Your Digital Jockey 2 Master Edition features an integrated professional audio interface with 24
bit/96 kHz. Therefore an additional external or integrated PC sound card is not necessary. Below you
can find a list of all possible connections:
a) Audio Output (rear panel) -B45-
Here you can plug in your main stereo system, for example an amplifier or active speakers. This can
be done via asymmetrical RCA outputs or symmetrical 6.3 mm Jack outputs.
b) Booth Output -B56-
Here you can connect a monitoring system or you may use this output in order to record your mix
with an external recording device.
NOTE! The volume of this output is not individually adjustable.
c) Audio Input (rear panel) -B46-
You can connect a playback device to this input, like a turntable or a CD player, for example, in order
to integrate external players in your setup. Regarding this issue please also refer to chapter 6 Stand
Alone/Software Operation on page 28
NOTE! Next to each input there is a Phono/Line switch -B47- that has to be adjusted according
to the connected source.
Please also observe the item B48 Phono/Line Routing Switch – via this it is possible to determine
the input routing.
d) Microphone Connection (front panel) -B35-
Here you can plug in a regular dynamic microphone. Via the Mic Routing Switch -B57- the micro-
phone signal can be routed directly to the Master Output, facilitatin usage in stand alone mode or
routing via the software.
e) Headphones Connection (front panel) -B38-
It is possible to connect headphones with 3.5 or 6.3 mm jack to this connector. If desired, both con-
nectors can be used simultaneously.
MONITOR
Booth (RCA)
Input 1
PHONO/LINE
6,3 mm jack
MIC
PA
LAPTOP
Master 1
(3,6 mm jack/RCA)
Power
Input 2
PHONO/LINE
HEADPHONES
6,3 mm jack
3,5 mm jack
23