STERWINS 1300 JET SM5I-3 Notice De Montage, Utilisation Et Entretien page 192

•Do not use any sharp tool (cutter, knife...) when unboxing, you
FR
may damage the product.
ES
•Do not use the power cord to lift, carry or transport the
PT
machine.
•Do not scrape the power cord across sharp edges and ensure
IT
that it does not get pressed.
EL
4.2 INSTALLATION
PL
Tightly screw the pump
Attach the pump to a flat level surface with suitable screws and silent block if necessary.
RU
KZ
UA
RO
Suction hose
Assemble the different elements together according to the illustration. In case screw are necessary : tight
EN
it with appropriate tool.
• As a basic principle, we recommend using:
- A preliminary filter, in order to avoid unnecessary damage to the pump as a result of stones and solid
foreign bodies.
- A suction-hose set with suction hose and an check valve with a strainer (in order to prevent long
priming periods).
• If you cannot obtain a suction-hose set, please purchase :
- an 25 mm (1") intake hose
- a check valve with a strainer
- 2 hose clamps 2 standard adapters (one for the suction hose, one for the discharge line) and assemble
the suction-hose set yourself using a standard adapter and a clamp.
Attach the filter to the wall. Make sure that the vibrations of the pump do not damage this
installation (flexible connection is strongly recommended)
4.3 FIRST USE
Pay particular attention using the machine for the first time : focus and dedicate all your attention to this
first use.
illustration 2.2
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed !
CAUTION ! Always wear safety glasses and gloves during
installation.
illustration 2.3
WARNING ! Read the « SAFETY INSTRUCTION » section at the
beginning of this manual including all text under subheading
therein before using this product.
192